Annual Maintenance Plan Details
Annual Maintenance Plans:
All maintenance plan packages below include VIP priority service – so if your equipment happens to go down during a busy time, your service call goes to the top of the list. We go to your home first! Also you will receive 10% off any repairs that are needed.
Own an office or commercial building? We have preventive maintenance plans for that as well. Give us a call at (509) 484-1405 and we’ll get you setup.
R&R Heating Comfort Club Sign Up
Join The R&R Comfort Club Today!
Tell us a little about yourself and one of our friendly Comfort Specialists will reach out to you and help you find the perfect plan for your equipment.
Annual Preventive Maintenance Plan Details:
Our annual preventive maintenance plan packages are flexible and custom tailored to your specific needs. Choose the plan(s) below that works best for you:
PLAN A – A/C & Heat Pump
- Clean condenser coil if needed.
- Check all wiring for loose connections.
- Adjust furnace airflow for optimum cooling. Read More
- Check for refrigerant leaks.
- Check pressure safety switch if equipped.
- Check fan motor for wear and alignment.
- Check expansion valve & coil temperatures.
- Check system refrigerant charge.
- Check condensate drain for leaks.
- Check defrost cycle and reversing valve on
- Heat-pump units only.
PLAN B – Boiler
- Check the condition of vent connection pipe
- Check the integrity of the heat exchanger Read More
- Adjust the controls on the boiler to provide optimum water temperature settings for both efficiency and comfort
- Test high-limit control
- Inspect pressure tank
- Clean the heat exchanger exterior
- Check for water leaks
- Inspect and test pumps
PLAN E – Electric Air Cleaner
- Inspect and clean cells and pre-filters
- Check contact points
- Clean pre-filters Read More
- Check ionizer wires
- Adjust cell plates for proper spacing
PLAN F – Gas / Electric Furnace
- Clean and adjust automatic controls
- Clean burner assembly
- Adjust gas valve for optimum fuel usage Read More
- Test for combustion leaks
- Check blower / belt wear
- Check flue system for correct operation
- Test safety shutoff for correct operation
- Check gas connections for leaks
- Visually inspect heat exchangers for obvious leaks
- Check all wiring for loose connections
- Check supply voltage
- Check amperage draw
PLAN G – Geothermal System
- Check hot water generator coil for
- Check and clean condensate drain Read More
- Check all wiring for loose connections
- Check blower / belt wear
- Test safety shutoff for correct operation
- Clean and adjust automatic controls
- Verify system is operating efficiently using
- Heat of Extraction / Rejection form
PLAN H – Humidifier
- Replace media pad (does not include steam)
- Inspect / Clean water pan and float
- Check solenoid, heater and motor Read More
- Check drain
- Verify operation
PLAN FP – Fireplace
- Clean glass
- Check all gas connections
- Adjust log placement Read More
- Inspect accessible vent system
- Clean pilot & burner assemblies
- Check wiring connections
- Test fan on/off operation
We Service All Brands
Previous
Next